Registration Now Open for the 2025 VIM User Group & Training Event! September 30 – October 2, 2025, - Charlotte, NC Read More
ECMPS 2.0 Update EPA Delays Rollout and Key Changes until Q1 2026 Read more
LME EDR Utility A secure and reliable web-based utility that will allow any LME source to efficiently, and economically, create LME EDRs. Learn More
EPAS (Environmental Project Assessment Service) Ensure success implementing your environmental reporting system. Read Now
Did you know that VIM provides outsourcing for your auditing and reporting needs? Improve your compliance experience. More Details

Featured News

EPA Publishes Proposed Rule to Repeal Certain MATS Amendments

July 17, 2025

On June 17, 2025, US EPA published a proposed rule entitled, National Emission Standards for Hazardous Air Pollutants: Coal- and Oil-Fired Electric Utility Steam Generating Units, in the Federal Register. A copy of the proposed rule is available here. The rule proposes to repeal certain amendments to the Mercury and Air Toxics Standards (MATS) Rule […]

Read Post

VIM’s Exclusive EPAS Service Pays Dividends

May 20, 2025

VIM’s Exclusive EPAS Service Pays Dividends VIM’s EPAS Service Your facility’s environmental compliance program is only as strong as its documentation, procedures, and technical infrastructure. VIM Technologies’ Environmental Project Assessment Service (EPAS) is a turnkey solution to: Evaluate your current compliance framework Clarify applicable regulations Document systems, data flows, data validation, averaging, reporting, and procedures […]

Read Post

CEMLink6 Email to Text – AT&T Issue

May 14, 2025

CEMLink6 can send text messages to users using the system’s email capabilities. Users can receive alarm information and scheduled reports. Mobile phone providers use email to text functionality to allow customers to receive a text message from an email through their email-to-text service. CEMLink6 will send an email to a provider’s email address with the […]

Read Post

ECMPS 2.0 Rollout Delayed to 2026: What You Need to Know

April 23, 2025

On April 22nd, 2025, EPA’s Clean Air and Power Division (CAPD) provided a status update on the ECMPS 2.0 re-engineering effort. The blog post can be found here. The key takeaway from the message is the delay for ECMPS 2.0 implementation until at least Q1 2026 (from Q3 2025). This announcement didn’t take us by surprise […]

Read Post

President Signs Proclamation Granting MATS Rule Exemption For Certain Sources

April 18, 2025

On Tuesday, April 8, 2025, the President issued a Presidential Proclamation exempting specified stationary sources, listed in Annex I of the Proclamation, from compliance with the “National Emissions Standards for Hazardous Air Pollutants: Coal- and Oil-Fired Electric Utility Steam Generating Units Review of the Residual Risk and Technology Review” (89 Federal Register 38508) (the “Rule”). […]

Read Post

ECMPS 2.0 Update EPA Announces Q3 2025 Rollout and Key Changes

January 23, 2025

On December 20th, 2024, EPA’s Clean Air and Power Division (CAPD) provided a status update on the ECMPS 2.0 re-engineering effort. The blog post can be found here. Their message addressed the following three (3) key points: Copies of the ECMPS 2.0 monitoring plan, quality assurance and emissions reporting instructions were posted. They confirmed that […]

Read Post

What’s New In CEMLink6 — August 2024

August 21, 2024

We have some CEMLink6 news for you! Before we move further into August and forget Christmas in July, VIM Technologies is thrilled to announce a range of top-notch features we’ve rolled out in CEMLink6. We understand that today’s requirements and trends are evolving rapidly, and our dedicated development team is here to meet those challenges […]

Read Post

Part 75 Desk Audit Update

June 26, 2024

The Clean Air & Power Division (CAPD), formerly known as the Clean Air Markets Division (CAMD), continues to conduct virtual Part 75 continuous emission monitoring system (CEMS) program audits referred to as “Part 75 Desk Audits.” Initially, the Desk Audits primarily focused on coal-fired units equipped with full CEMS. Part 75 Desk Audits are conducted […]

Read Post

Leader in Data Acquisition and Compliance

Established in 1992, VIM Technologies, Inc. has become the market leader in providing quality products and supplemental services for environmental compliance. Our flagship product, CEMLink 6, offers cutting edge data acquisition and reporting solutions for our ever-changing industry. We developed COMPAS to assist with your quality assurance programs, audits, training, reporting, analysis, and other compliance needs. When you choose VIM for your air compliance solutions, you will find a partner, not just a vendor.

Experience

Electric Generation

Our experience with electric generation applications include coal fired, combined cycle and simple cycle gas turbines, and biomass.

Cement

We are well versed in the cement industry’s latest regulations and are well-equipped to assist with compliance.

Petrochemical & Refining

We have over 20 years of experience and work hand-in-hand with key industry leaders.

Pulp & Paper

The flexibility of our software makes it ideal for the pulp and paper industry and can help ensure compliance to regulations.

Fine Chemicals

From the pharmaceutical to chemical industries, we provide software and services to all major suppliers.

Sterilization

We’ve partnered with Clean Air Engineering to provide a turnkey approach to clients impacted by the NESHAP for Ethylene Oxide.

Other Industries

We have the most diverse experience in the industry with implementing a variety of emissions monitoring standards.